Common Types of Child Ankle Fractures

A sprained foot or broken ankle is painful and causes short term disabilities among all. In case of any damage to the special tissues within the ankle, the recovery becomes complicated. And for a child with a sprained foot, if the injury is in the growth plate if the ankle, special attention needs to be given so it doesn’t lead to any permanent injury. Two main types of fractures occur in the ankle, details are as follow:

Distal Tibial Fracture

Two further types occur in the case of distal tibial fracture:

  • The Displaced form; In this form, the fragments of the fractured bones are either separated or misaligned.
  • The Non-Displaced Form; In this form, the fragments of the fractured bones are aligned.

When the non-displaced fracture happens concerning the distal tibial, it seems to be an ankle sprain. It starts with swelling followed by pain which makes it difficult for a child to even walk. If you get an x-ray done of the injured muscles, it will show a very mild fracture. Thus, physical examination by the physicians preferably orthopaedic can help in better diagnosis for getting the treatment done. In the first phase of the treatment, a child will be needing braces or even a cast for assistance in the walk. Sometimes walking boots also help. This treatment works for 3 to 4 weeks. It is very uncommon for a growth arrest to get this type of fracture.

It is very essential to have an accurate and true diagnosis of the issue so the decision for surgery could be taken. During the displaced fractures, sometimes the growth of the bones stop. Thus, for the examination and diagnosis of any probable damage to the ankle joint, it is good to get a clinical examination done with the help of an x-ray. Also to ensure there is no permanent damage to the growth plate, the child’s ankle needs to be examined for the next 1 to 2 years.

In case of any mild fracture owing to distal tibial fracture, treatment is done with casting. You might be asked to get done an MRI or CT scan for finding it a surgical procedure is required.

Distal Fibula Fracture

This type is common in both displaced and non-displaced types.  The non-displaced distal fibula fracture is more like ankle sprains. The treatment of the sprains is more like the same as in the case of displaced tibial fracture. Parents need to go for a follow up for 1 to 2 years so see if there is any disturbance in the growth of the joint.

The fracture of the displaced distal fibula needs surgical treatment in case the fracture leads to the ankle joint. The ultimate goal of the surgery is to align the joint surface and make is properly aligned and smooth. In case the displacement doesn’t align.

Pediatric orthopaedic are expert in the diagnosis, treatment and provision of medical care. The immediate examination needs to find an accurate solution to the injury.


An ankle fracture or sprained foot can occur to any child at any age. Parents need to pay special attention to the diagnosis so any permanent damage to the ankle joint could be avoided.

When Happens When My Child has a Broken Ankle?

An ankle fracture or a broken ankle is a normal condition faced by kids parents. It happens when one of the key bones of the ankle (fibula, tibia & talus) breaks apart. Normally among kids, the fracture is common in the long bones which are the tibia and fibula whereas the smaller bone, i.e., talus remains intact. Normally the growth plates are involved as far as the breaking of tibia and fibula is concerned.

If the issues are with the growth plate owing to fracture in the tibia or fibula, then immediate attention should be given because it can cause unequal growth or length of the bones. You can get bones/fracture checked by the orthopaedic surgeon for getting assistance.

The article is about a general understanding of a kids broken ankle or sprained foot. It shares what needs to be done what injury happen and what are the common symptoms.

Anatomy of the Ankle Joint

Three main bones make the ankle joint. Bones are linked with other bones with the help of ligament. The ligament is like a robe-like structure that connects the bones. To keep the joint stable, there are many ligaments within the ankle. The key bones in the ankle joint are:

  • Fibula bone which is the smaller bone within the lower part of the leg
  • Tibia, which is also called a shinbone
  • Talus bone, which is also called foot bone that acts as a hinge between the fibula and tibia bones

Back-end Causes for Ankle fractures

Twisting Force

During any sports event, sometimes foot or lower leg bone/joint twists or rupture leading to breakage of the ankle. Certain sports activities like jumping along with lateral motions including basketball put children at more risk of causing a fracture in their ankle. Often while playing, the child tends to either rebound, defend, shoot, or accidentally jump of other children’s foot; thus leading to rolling or twisting of the foot from either outside or inside.

Growth Plates

The body has long born which do not grow from the centre position. Such bones rather grow from the edge of the bones or ends. When a child grows, the growth plate becomes hard bones. Since growth plates are the last bone to become fully developed so these bones are more vulnerable to getting fractured. On the other hand, the ligament, which connects the talus bones are stronger when compared to the growth plates. That is why any twist in the bone leads to fracture among kids.

Among all types of fracture in the growth plates, this paediatric fracture accounts for 9 to 18 per cent of total fractures. Fracture in the hand and wrist are more common in kids age 10 years to 15 years.

What to look for in case of a Child Broken ankle?

First, you need to get an x-ray done to differentiate between ankle sprain, which is a severe form of ankle fracture. In the initial phase either fracture or sprain, both cause pain as well as swelling. When a child finds it hard to put pressure on the ankle which is injured. If the injury has been caused on open skin, then its time to take a child to a specialist immediately.

Top Toilet Bowl Brands to Choose From in Singapore

The toilet bowl is undoubtedly one of the most important things in our homes because we use it every day.

Every now and then, it is wise that you upgrade your toilet bowl and accessories to make your bathroom look modern and comfortable to stay.

Choosing among the many toilet bowls and accessories in Singapore is overwhelming, to say the least, as there are so many models and brands to choose from here.

To increase the odds of you picking a high-quality toilet bowl, you should buy from any of the top-notch toilet bowl brands in Singapore.

The following article by Unopening unveils some of the leading toilet bowl brands in Singapore.

10 Best Toilet Bowl Brands in Singapore to Consider for Your Home

The toilet bowl is one of the most important things in our home, yet also one of the most unappreciatedRead more here.

Surely, you now know some of the top toilet bowl brands in Singapore. Note that some of these brands also offer high-quality toilet accessories. These popular brands were able to rise to the top because they offer durable products and pay attention to details. Before choosing any of the many toilet bowls sold by these brands, there are a few things you must know.

The following article by Cromly sheds light on some important things you should give careful consideration before buying a toilet bowl.

Things you need to know before choosing your toilet bowl

Some homeowners think it’s quite a standard feature that they don’t need to think about which one to buyRead more here.

The above article is surely going to make your shopping for a new toilet bowl easier, as it revealed basically everything you need to consider before choosing a toilet bowl. The article also brought to light some of the main types, shapes, and heights of toilet bowls on the market. If you are having a hard time narrowing down the right toilet bowl for your home, you are going to find the next article useful.

The following articleby Mrplumber contains basically everything you need to know to choose the best toilet bowl for your home.  

Toilet Bowl Singapore: Choosing the Right One for Your Household

The toilet bowl is one of the most important aspects of any toilet that is used daily, so it would be wise to choose one that would fit the comfort of your home. Read more here.

Shopping for a new toilet bowl is definitely going to be easy for anyone who read the above article, as it unveiled everything from the main designs and configuration of a modern toilet bowl to some key things to consider before purchasing a toilet bowl in Singapore. Contact an experienced plumber if you need extra help in picking the right toilet bowl for your bathroom.

Final note

Choosing among the many toilet bowls in Singapore is by no means a walk in the park, as there are hundreds of models to choose from.

While you have the freedom to buy from any toilet bowl brand you like, it is smart that you only buy from reputable brands that offer durable and budget-friendly products.

Note that not all the toilet bowls offered by these brands will be right for your home. So before making a final decision, you must do some research.

Don’t hesitate to seek the advice of an experienced plumber if you are stuck.

Compelling Reasons Why You Should Buy a Smart Toilet in Singapore

How many times do you use your bathroom each day? If you are like most people, you are probably using it 2 to 3 times daily. Regardless of the number of times you use it, you must make it as comfortable as possible.

A simple way to do this is by upgrading your toilet. Thanks to new technologies, there are a lot of high-end smart toilets in Singapore that has a lot of amazing functions.

When it comes to hygiene and comfort, smart and intelligent toilets have a lot more to offer than regular toilets. This explains why they are somewhat pricy.

The following article by EdgeSingapore sheds light on some eye-opening reasons why you should consider upgrading your bathroom.

The smart bathroom

If you want to treat yourself to a luxe bathroom, make sure you pick a toilet that offers the best when it comes to comfort and hygiene. A natural choice is Toto’s latest Washlet bidet toilet seat, which has been named the world’s No 1 brand of shower toilet by volume sales by Euromonitor International- Read more here.

The above article has surely broadened your perspective and given you a clear picture of what makes up a smart bathroom. The article also unveiled some of the leading smart toilet brands, and a glimpse of what some of the best smart toilets on the market right now has to offer. If you are having a hard time narrowing down the right smart toilet for your bathroom, you are going to benefit from the next article.

The following article by Wisepicks unveils some of the best smart toilets in Singapore.

 8 Amazing Smart Toilets – Enjoy All the Benefits of the Progress 

Environmental concerns are pushing people to seek environmentally friendly products. From cars to toilets, nothing has been left behind in the quest of preserving the environment. Read more here.

The above article is surely going to make your shopping easier, as it unveiled everything from the best smart toilets on the market and the features they offer to their price tag and warranty. The article also sheds light on some important things you should know before purchasing any smart toilet in Singapore.

The following article by Plumber is basically a how-to guide to choosing the right toilet bowl.

How to choose the right toilet bowl for you?

The toilet bowl is one of the most important aspects of any toilet, so it would be wise to choose one that would fit the comfort of your home. When considering a toilet bowl replacement in Singapore, there is a few things to consider– Read more here. 

After reading the above article, you surely now know why it is important to consider factors like flushing technology, the height of the seat, toilet bowl operation, and a few other factors before making a final decision. Regardless of the toilet bowl you eventually purchase, ensure that it is of high quality and will match the design and aesthetics of your home.

Final note

The toilet is one of the most used parts of the home. Because of this, we must make it as comfortable as possible.

Well, the good news is that you don’t have to renovate your entire bathroom to make it look great. Replacing your present toilet with a smart one can make all the difference.

Needless to say, smart toilets are great and have lots of amazing features. But before investing in one, it is wise that you consider everything from your budget to the size and décor of your bathroom.

All You Need to Know Before Buying a Household Toilet Bowl in Singapore

Whether you want to renovate your entire bathroom or make a few changes to make it fit into the décor of your home, you should make plans to upgrade your toilet bowl.

Needless to say, the toilet bowl is something we use several times a day. Because we use it so often, it is a good idea to invest in a high-quality one that is efficient and modern.

Before you head out to any of the many sanitary-ware stores in Singapore, there are some important things you must know about toilet bowls and accessories.

Buying a toilet bowl without first arming yourself with the basic information about it isn’t really a good idea, as you may end up purchasing a toilet bowl model that isn’t right for your home.

The following article by Qanvas sheds light on some 4 things you need to know before buying a toilet bowl in Singapore.

Buying a Toilet Bowl: 4 Things You Really Need to Know

Yes, we know that the WC isn’t exactly the most glamourous bathroom fitting, but it’s hard to deny its importance. Read more here.

As can be seen from the above article, to choose the right toilet bowl for your home, you first have to know everything from the types of toilet bowls on the market, their size, and finally their water management capabilities. If you need a more detailed guide, you are going to benefit from the next article.

The following article by Fullsun is basically a how-to guide to purchasing a toilet bowl in Singapore.

Toilet Bowl Buying Guide: How to Buy the Best Toilet for You

The bathroom toilet is one of the most important and most-used items in your house. Therefore, it is more beneficial to find one that can conserve waterRead more here.

The above article has definitely armed you with some important tips that will help you find a good toilet bowl for your home. The article gave you a rough estimate of how much it is going to cost you to purchase a modern toilet bowl in Singapore. Read the next article carefully to learn where to purchase high-quality toilet bowls and accessories in Singapore.  

The following article by Houzz unveils some of the best places to buy toilet bowls and accessories in Singapore.

58 Singapore Kitchen and Bathroom Fixture Retailers and Installers

Purchase: Galassia WC Professional service by salesperson, analyze the problem we face. Great job for the.  Read more here.

Finding a reputable store to buy a toilet bowl for your home is going to be easy for you after reading the above article, as the article listed some 58 retailers that offer high-quality bathroom fixtures. Feel free to visit any of the stores in person to see what they offer. If you are too busy to go in person, then you should visit their websites.


Without help, narrowing down a toilet bowl that is water-efficient, easy to use, durable, and budget-friendly is going to be difficult for you.

You can make things easier for yourself by dedicating time to learn about the various types, sizes, and features of modern toilet bowls.

If you can do this, finding the right toilet bowl or toilet accessories for your home is going to be easier.

Fighting Cellulite Removal? Cryolipolysis Can Help You Win the Battle

Cellulite affects a majority of the women at the post‐pubertal age. While this can affect any part of the body, the thighs and bottoms are the most common places of occurrence.   Some also get these on their bellies.

Although it is not considered as a pathological condition, for most of the individuals, it remains a grave aesthetic concern. Varieties of treatment protocols are there for cellulite removal. Cryolipolysis can give satisfying results in improving the appearance of the skin.

What is Cryolipolysis?

Cryolipolysis is a noninvasive procedure of removing fat by freezing. When you have cellulite there is a fat deposition underneath the skin. The procedure involves freezing and killing these fat cells for cellulite removal.

Fat cells are easily damaged in cold conditions than skin cells. If they are cooled to a temperature lying in between the body temperature and the freezing temperature, the fat cells undergo apoptosis or localized cell death. Based on this, it involves localized, controlled cooling to cause death to the subcutaneous fat tissues without damaging the skin. Read about the different cellulite removal treatments offered here:

How it is performed?

You can get Cryolipolysis done either in a doctor’s chamber or in an outpatient clinic. The doctor or the trained healthcare provider uses a handheld applicator that resembles a vacuum cleaner.

This procedure is performed in a fully awake condition. On appearing for the treatment, the patient is thoroughly examined for assessing the size and shape of the fatty deposits beneath the skin. The affected area to be treated is then outlined with a skin-making pencil.

The doctor or the healthcare provider then apply a gel and the applicator over the targeted area and move it over the skin. During the process, the applicator sucks and cools the area. The patient may feel aching, cramping, stinging, and tingling sensations and ultimately numbness in the area.

This treatment may take anything between 1 to 3 hours depending on the condition. Some clinics use separate applicators together to treat multiple areas in one sitting. The patient may listen to music, or read, or may work on the laptop while the procedure is on.

Once the process is over, the applicator is removed and the treated area is massaged for two to three minutes for ensuring breaking down of the fat cells.

Advantages of Cryolipolysis

  • Involves no surgical incision
  • Low-risk procedure
  • Can be done on people of all ages
  • Permanent fat removal

What are the post-treatment guidelines? 

This simple procedure has no post-treatment guidelines except that you have to prevent weight gain. If your calorie intake is more than what you can burn off, it will cause fat deposition again. So, one must follow a healthy diet plan and do some exercises for maintaining the ideal weight.

When are the results noticeable?

Some people need more than one treatment procedure. Generally, improvement can be noticed within three weeks and you can have typical results after 2 to 3 months. But, flushing of the dead fat cells may continue up to 6 months.

Why Should You Choose Laser Treatments for Cellulite Removal?

All over the world, women are more prone to cellulite. These form beneath the skin and entail a lumpy look. While the thighs, bottom, and belly are the commonly affected areas, this may form anywhere on the body.

Although this is not harmful, people having cellulite feel shy on the beach due to the unsightly display. And women are seriously considering to get rid of this cosmetic issue. Among the many ways to remove cellulite, Laser treatment has many advantages. It involves no chemicals or drugs and the process is quick and simple.

How do laser treatments help cellulite removal?

Laser removal of cellulite is becoming more promising every day. When the affected area goes under Laser firing, it liquefies the fat under the skin, and also cut the connecting tissues that cause cellulite. Laser treatment further increases blood flow and reduces liquid retention. Read on for more cellulite removal treatments.

Different laser removal options

1. Laser Liposuction

This involves minimal invasion under local anesthesia. The doctor fires the laser beam for liquefying the fat in the affected area and it is removed through a thin tube (cannula).

2. Zerona

This procedure involves low-level laser therapy. It does not cause death to the fat cells but empties the content. Comfort is the best benefit of this cold laser process.

3. Sculpsure

It involves heating the fat cells. Additional cooling is also applied to prevent skin damage. This is generally not painful, but some patients experience a warming sensation.

4. Cellulaze

In this procedure, a laser tipped cannula or thin tube is inserted under the skin. The fat melts and passes out. The laser also stimulates the production of collagen that improves the depth and elasticity of the skin.

5. Cellfina

This is a minimally invasive procedure. The Surgeon applies local anesthesia and inserts a tiny device near every cellulite dimple. The vibrating blade at the end of the device cuts through the bands causing each dimple.

Advantages of laser cellulite removal

You can enjoy the following benefits by trying these procedures.

Guaranteed and quick results

Surgical removal of cellulite involves an extended recovery period. With a laser, you do not have such problems. A laser session continues for about 30 minutes and you may need up to in case of severe cellulite. Once you complete following the sessions, you will have beautiful skin without dimples over there.

Low-risk procedure

All cosmetic treatment procedures are associated with a certain amount of risk. Surgery and other invasive methods have a great risk. But laser causes reddening of the area only and this becomes normal after a few days.

No pain procedure

Individuals undergoing surgery and other incisive cellulite removal processes cause pain during recovery. Laser treatment is a painless procedure, though some may have a feeling of discomfort. However, this disappears after a short while. 

Provides additional skin benefits

Laser treatment not only removes cellulite it also clears up any scratches present in that area. Thus, you get glowing skin at the end of the day free of cost. Moreover, laser treatment also thickens the skin which is great in preventing cellulite formation.

Cellulite Removal: Facts to Know Before Any Treatments

The road to a soft, silky, and glowing skin is not always smooth. As people grow older, dimples and bumps may appear on the skin. The unfortunate fact is that women, who are always sensitive about their figure and looks, are more likely to plague with such conditions.

It is not a health issue or an ideal condition either. This makes the women frustrated and they go all out to get it remedied This write-up aims to dwell on some essential facts and the ways to treat cellulite removal.

What is cellulite?

It is a bumpy or dimpled appearance that some individuals have on thighs, bottoms, and bellies. As the distribution of fat cells, muscles, and connecting tissues are different in women than men, women are more prone to this.

Men have a crisscross pattern tissue structure, while for women it is almost vertical. The deposition of fat beneath the skin pushes the connecting tissues and causes ripples and unevenness on the skin surface. This is known as cellulite.

What causes cellulite?

Our skin has three layers: epidermis or the outer layer; dermis the layer just below the outer layer and containing connective tissues, hair follicles, & sweat glands; and hypodermis, the deepest layer containing fat and connective tissues.

While the exact cause of cellulite formation is not known, the doctors think that it is mostly caused due to bulging of the fat cells underneath the skin and their interaction with the connective tissues in the dermatological layer.

Grades of cellulite

Cellulite is divided into four grades as per the severity.

  • Grade 1: This is not visible to the naked eye. Changes occur below the skin surface. Only microscopic examination can detect this.
  • Grade 2: The skin becomes a bit pale. The elasticity of the skin is also decreased without any visible roughness or orange peel.
  • Grade 3: Over and above the signs of grade 2 lumps and bumps become evident on the skin.
  • Grade 4: It is the last stage. It is associated with a wavy appearance with prominent dimples. Sometimes there are painful lumps as well.

Cellulite treatment options

There are a variety of options available for cellulite removal. Here are some of them.


This is also known as CoolSculpting. This is a non-invasive procedure that kills the fat cells by freezing which helps to improve cellulite. Multiple sittings are required to get the desired results.

Laser treatment

This is a minimally invasive method. It uses laser beams to break the fibrous bands that hold the fat cells and liquefy the fat. It also stimulates collagen growth and helps to tighten the skin. Combine with liposuction and massage it yields effective results.

Radiofrequency treatment

This is a noninvasive energy-based procedure. Radiofrequency beam can penetrate deep into the skin. When applied this liquefies the fat and also improves skin condition.

Acoustic wave therapy

In this procedure sound waves are used through a transducer for breaking up the cellulite.


In such cases, the doctors use needles, blades, etc. to separate the connecting tissue under the skin for improving the condition.

Precautions to Take Before a PRP Injection

Since your blood will be required for the platelets to be retrieved for the PRP injection, taking precautions before the treatment is vital. Some of the precautions include halting in-take of blood thinners, arthritis, and steroid medication days or possibly weeks before the treatment. Patients are also required to take plenty of fluids the day before the procedure. Patients who experience anxiety may require anti-anxiety medication before the procedure.

Discussing your condition with the doctor early enough will ensure you are physically and emotionally prepared for the PRP procedure. Visit Providence’s Platelet Rich Plasma Injection Therapy here for more information.

In this article, Chuck Dinerstein discusses why it is important for doctors to look at the effectiveness of the treatment, despite its profitability.

Why PRP Treatment is Increasingly Becoming Popular

Ah, the mighty platelet. Once a neglected blood component, today it is the basis of an entirely new medical “specialty,” regenerative medicine, although market might be a better word choice.

The use of blood products in roles other than transfusion began almost a half-century ago when fibrinogen was used as a type of glue, to put tissue together. Platelets, neither a cell, like the red or white blood cell, nor a metabolite, like fibrinogen, is a cell fragment (no nucleus). It is deeply involved in tissue repair, helping to form clots to fix a leaky blood vessel and containing a number of growth factors that signal and stimulate cell proliferation and… Read more here

In 2009, PRP therapy was a $45 million market. By 2016, the value of this treatment had quadrupled, with growth estimates being about 13% annually. This shows that many doctors and patients are opting for this form of therapy. It is vital that the focus on the PRP treatment remains on its viability, over its profitability. Many doctors opt for this treatment because they consider it useful, and the patient is not at risk of an allergic reaction because the platelets used are from the patient’s blood.

The following article on, the writer, discusses injuries that can benefit from PRP treatment, the process and the steps taken during recovery.

Recovery Process after the PRP Treatment

Athletes who endure chronic pain from tendon injuries can finally get relief from a safe, non-surgical procedure. It’s called Platelet-Rich Plasma (PRP) Therapy, and it utilizes platelets from the athletes’ own blood to rebuild a damaged tendon. It has been successful in not only relieving the pain, but also in jumpstarting the healing process.

Tendons are the rope-like structures that connect muscle to bone, enabling the bone to move. When a tendon is first injured, it can become inflamed, swollen and painful. This injury is often experienced by athletes in tennis, baseball, football, and any other sport that requires repetitive throwing motions. Read more here

Many sportsmen and women are concerned about the period they expect to be out of the game before they are completely healed. This is one of the questions many people ask when faced with multiple choices when it comes to the treatment of an injury. Once a patient undergoes the PRP treatment, the period of rest could be anywhere between six and twelve weeks. After six weeks, depending on the extent of the injury, the patient may begin physical therapy. Twelve weeks after the treatment, the patient is evaluated for signs of improvement. Patients with extensive injuries may require more than one treatment if the desired outcome is to be achieved.

An article on from the American Orthopaedic Society for Sports Medicine, focuses on conditions that benefit from PRP treatment, and those that do not improve despite the use of this treatment.

What Causes Failure in Some PRP Treatments?

The use of platelet-rich plasma therapy can reduce the risk of a second meniscus failure after operation but does not seem to protect patients who have had surgery to repair an anterior cruciate ligament, according to research presented at the Annual Meeting of the American Orthopedic Society of Sports Medicine.

Platelet-rich plasma therapy involves the extraction of blood from the patient, which is then centrifuged to obtain a concentrated suspension of platelets. It then undergoes a two-stage centrifugation process to separate the solid and liquid components of the anticoagulated blood. Read more here

The PRP injection is still undergoing tests as researchers try to determine why this treatment works exceptionally well in some cases and fails in some. Is it a problem with preparation, or is the therapy affected by the tissue reconstruction process? Is the treatment more viable in some parts of the body and a failure in other areas? For now, doctors are using this treatment on conditions that have been proven to improve after the PRP injection.

Compelling Reasons Why Parents in Singapore Should Take Their Injured Kids to a Paediatric Orthopaedic Specialist

As the loving and caring parent that you are, you are ready to do whatever it takes to help your kids grow physically, mentally, and academically. And that is why you sent them to great schools and shower them with love and attention. As they grow up, you may notice some abnormalities, perhaps in the way they walk or run. When this happens, you should make plans to take them to a reputable paediatric orthopaedic in Singapore as soon as you can. Ignore this, and you may have to opt for an invasive procedure to correct your child’s issue.

 Generally, children love to run around and play with their friends. As they do this, they may fall and sustain a serious injury. When this happens, most parents usually take their kids to see a regular doctor to get examined and treated. But at times seeing a regular doctor may not be enough, especially if the child’s injury is severe or if a bone was broken. A visit to a paediatric orthopaedic specialist may be necessary so that they can be thoroughly examined and treated.

Read on to find some convincing reasons why you should take your child to a paediatric Orthopaedic specialist when they are seriously injured.

Correct diagnosis

Regular doctors may lack the knowledge, skill, and technique to handle issues related to bone disorder and abnormalities. Because of this, they may not be able to offer the best care and treatments. Even worse, they may not diagnose a condition correctly and thus offer the wrong treatment.

To prevent all these from happening, take your kid to an experienced paediatric orthopaedic specialist, as they have been specifically trained to diagnose and treat kids.

Prevent your child’s issue from deteriorating

As previously mentioned, ignoring a bone related issue is a recipe for disaster. And this is because the condition may deteriorate and warrant a surgical procedure to address it in the future.

Most parents are skeptical about taking their kids to a pa

ediatric orthopaedic because they aren’t sure what to expect. Because of this, they assume the doctor is going to tell them that their child needs surgery. Well, this may be far from the truth because there are a lot of effective non-surgical treatments for kids.

Recover quicker

When you take your child to a reputable paediatric orthopaedic in Singapore, you can be confident that he or she will get the best care and the right treatments. This will go a long way in helping them recover quicker.

When to take your child to a paediatric orthopaedic specialist

A lot of parents in Singapore find it difficult to determine when to take their child to see a paediatric orthopaedic and when to see a regular doctor, perhaps because they don’t have a solid medical background. So, don’t feel alone if this is true in your case, as there are others like you.

Below is a list of conditions in children that should only be addressed by a paediatric orthopedic.

  • Flat feet
  • In-toeing
  • Fractures
  • ACL tear
  • Scoliosis
  • Toe walking
  • Blount disease
  • Ankle sprain
  • Discoid Meniscus
  • Bowleg
  • Pulled Elbow

A lot of parents in Singapore are very much concerned about the way their child walks. So, when they notice them limping or walking abnormally, they are usually very worried. But sometimes, the reason they limp may not because they are injured or have a health condition. Some kids limp or walk abnormally because they want to. They may also do this when they are stressed.

Benefits of PRP Injections

PRP injections have, for a long time, been a popular solution among sportsmen and women because they have helped in the recovery of injuries. However, given its benefits, this treatment has been used for other conditions that are not linked to sports injuries. PRP therapy has been used to boost hair growth, inflammation reduction, and improve healing after jaw and plastic surgery. Doctors are increasingly adopting this treatment because of the benefits.

In this article, John Wilson MD discusses the process of PRP treatment and the importance of precision when injecting the affected area.

The importance of having a Professional Manage PRP Injections

Platelet-rich plasma injections are outpatient procedures. Because the patient’s blood must be drawn and prepared for injection, a typical procedure may take anywhere from 45 to 90 minutes.

Whether the patient has a one-time injection or a series of injections spaced over weeks or months is up to the individual patient and doctor. If a series of injections is planned, a doctor may recommend a single blood draw during the first visit and use fresh PRP in the first injection and freezing and thaw the remaining PRP as needed for future injections. However, some experts believe freezing and thawing PRP negatively affects its usefulness and prefer to do a separate blood draw for each PRP injection. Read more here

It is critical for people seeking PRP treatment to seek help from a medical professional who understands the importance of the area where the platelets are injected. This is because the focus of the therapy is to aid the healing of an injury. Doctors use imaging technology to ensure the right area is injected if the desired outcome is to be achieved. Platelet Rich Plasma injections (PRP) have a concentrated dosage of platelets and failure to do it right may lead to wastage, and the treatment may end up being ineffective.

In the following article on, Kevin J. Collins MD looks at conditions whose treatment can be boosted with the use of PRP injections, as well as, people who may not benefit from this treatment.

People and Conditions that May Not Benefit from PRP Injections

Platelet-rich plasma (PRP) therapy has been around in some form since the mid-1990s. Lately, it has received considerable attention in the news and in medical journals for its potential for treating chronic tendonitis (inflammation of the tissue connecting muscle to bone) and acute sports injuries.

PRP therapy is a nonsurgical treatment for bones, cartilage, muscles, tendons, and ligaments (tissue connecting one bone to another) shown to slow, halt, or possibly even heal progressive damage. It also has the potential to reduce pain and improve joint function. PRP therapy works by making use of the natural healing properties of the platelets found in blood plasma. Read me here

PRP therapy has been beneficial to various people suffering from different conditions. Unfortunately, not everyone is a candidate for this treatment. People who have cerebral palsy or Parkinson’s disease fall in the category of those not eligible for PRP therapy. People who are on cancer treatments and those already treating infections, such as hepatitis, should not consider PRP injections. Additional, those with bleeding disorders or those on blood thinners are at risk if PRP therapy is introduced.

Jonathan Cluett, MD discusses everything to do with PRP injections, including the process, cost, effectiveness, and what patients should expect to feel during the treatment.

The Cost of PRP Injections

Platelet-rich plasma (abbreviated PRP) is a treatment used for a variety of common orthopedic conditions. PRP is a concentration of platelet cells taken from your blood, and these platelets have growth factors that may help in the healing process of chronic injuries.

Growth factors are chemicals that signal the body to initiate a healing response. By injecting PRP into areas of an injury, the hope is to stimulate and optimize your body’s ability to heal the chronic conditions. PRP contains a high concentration of platelets, other blood cells important in healing, and growth factors. Read more here

Unfortunately, the PRP treatment is not yet being covered by insurance companies. Patients have to take care of the fees if they opt for this treatment. Most physicians charge between $500 and $1000 per injection. Sometimes, depending on the condition, the fees can go as high as $2,500. The cost may affect the ability of some people to opt for this treatment. However, some health facilities offer flexible payment terms.

Best Places to Buy Mattresses in Singapore

There are many places you can buy a natural mattress of your choice in Singapore from brand stores, furniture megastores, and online marketplaces. The brand stores are typically the most expensive, as they sell at retail price. But before you take the plunge and make a purchase, it’s essential to get the feel of the mattress first hand in the store.

Most brands will have samples in the furniture store where customers can see and experience what they are buying. In this article, we will outline stores that have a variety of brand to choose from and many different mattress types such as back pain mattresses.  In these stores, you will find a broader range of mattresses and other related accessories, compared to a general furniture outlet.

Harvey Norman

Harvey Norman retails a good a variety of mattresses. They also carry popular brands like Baton Sleep, Levitate, Haylee brands, among others. You will find both affordable and high-end mattresses with over 40 types of mattresses and beds. The mattresses in this store include latex mattresses, spring mattresses, and memory foam mattresses. Harvey Norman conducts sales very often so make sure to check if there is one happening, you will be saving a lot of money.


Courts sells a wide range of mattresses including brands like Sealy, Four Stars, and Woosa and Noa mattress. The store carries both affordable and high-end brands products. There are over 500 options to choose from, and you will be able to find related accessories in their store, including protectors, pillows, and bed frames.


Shopping for a mattress online can be tricky if you don’t know the brand very well. That’s why it recommended that you visit a store and test out the mattress of your choice. Ordering online becomes easy after that because FurnitureSG offers delivery services. Before hitting check out, look for discount codes or shop sales, prices are usually the lowest at these clearance sales. Also, be aware of how many free trial dates are available and refund or exchange terms in case you do not like what you purchased.


Lazada is a market place where you are likely to find everything being sold here. Most brand and third-party sellers will have listings on this site. Check out their terms and conditions before selling. Compare prices between sellers selling the mattress you are interested in. Lastly, check the sellers rating to know his history and reviews from customers who purchased a product from that seller. This way, you get to get to know if they will deliver and if they are selling the genuine product.


Dunlopillo has 23 locations in Singapore. The company specializes in sleep products offering mattresses and bedding to its customers. This store carries many brands and has many collections, including basic, imperial, and spinal care. Some of the types of mattress you’ll be able to find in their showroom include basic, full latex, nano-tech, and more. In addition to mattresses, Dunlopillo also sells other related accessories like bed sets, latex toppers, mattress protectors, and pillows.


Singapore isn’t short of destinations to buy mattresses. The above listed places are just a tip of the iceberg. More destinations are available all across the country. Our list, however, contains trusted destinations that assure you of quality of your product upon purchase. Make your mattress purchase today!

Top King and Queen Size Mattress Brands in Singapore

The thought of where to get a good quality king size and queen size mattress can be burdensome mostly when one is totally a novice or oblivious of the connection between bed sizes and comfort. This article help you conquer the stress as it contains the list of best 5 king and queen size mattresses in Singapore from which you’ll have value for your money, comfort and vitality.

European Bedding Mattresses

To be the best natural source, it has to be organic. European Bedding proudly carries the Heveya bedding product range which offers 100% natural organic latex mattresses and pillows for a worry-free sleep. Their mattresses also come with a 100 nights free trial. Thus aiding in purchasing a mattress with the right firmness and support with no extra costs incurred.

Haylee Mattresses

Designed in Singapore, the Haylee mattress provides remarkable comfort and was thoughtfully built to let your body enjoy the rest that you simply don’t enjoy enough. Its firmness and cooling gel layer super perfect for the Singapore weather, which gives solid support for one’s back and spine makes Haylee one of the preferred choices. These mattresses also come with a 100 night sleep trial for free.

Sofzsleep Mattresses

Sofzsleep’s mission is to consistently manufacture products of the highest possible standards in the last 7 years. They bring German technological expertise and the best natural materials available, together with contemporary design aesthetic, to provide maximum comfort and optimal body support, at the most competitive price. Each material sourced has its own properties that enhance sleeping comfort. Afterall, sleep is our natural state, so it is only natural that the purest materials are used to craft perfect sleep for all.

Seahorse Mattresses

“Sea Horse” brand was establish in the mid-80s’ in Hong Kong. The brand aims at the general public, famous for its excellent quality with economic pricing. In 1987, the Sea Horse Healthy Mattress was launched. According to SRH report, Sea Horse Mattresses and pillows have been the number one best sellers in Hong Kong and Singapore. And “Sea Horse” mattresses achieved No. 1 in terms of sales volume with lion’s share in Hong Kong for 26 consecutive years. Sea Horse brand is a ideal choice for consumers looking for top grade products with reasonable price.

King Koil Mattresses

Around since 1898, King Koil has a wide range of quality spring mattresses with the promise of ‘Ultimate Comfort Made to Last’. Inner spring mattresses, premium pocketed spring mattresses, accompanying divans, headboards and bedframes as well as luxury bedlinens and bedding accessories are all part of the wide range of offerings at King Koil.

How to Move a King Size Bed into a New Apartment

Moving a king size bed to a new apartment or from the vendors warehouse can be a bit challenging owing to its big size and heavy weight, but this is nothing to worry about as you wouldn’t be expected to carry it on your head. In the case of moving to a new apartment, the bed will be the last item you would want to pack.

Ideally, the pros of moving a king-size mattress without hiring anyone include full control of the move as well as the money investment saved by attempting this on your own or with your family and friends.

The packing process will be a bit different depending on the model of the king-sized bed you have.

Nonetheless, irrespective of the model of the king size bed you have, the below is a perfect guide to dismantling and conveniently moving the bed.

Step by step process:

Move the mattress and box spring, package them into airtight mattress bags to protect them from water and dirt

Disassemble the bed frame: this will differ depending on the bed model, always ensure that the manufacturer’s manual is safely kept for disassembling instructions mostly if the bed has a king headboard, you will need the manual to be able to disassemble it and fix it back.

Wrap it and pack it: wrapping the bed frame in bubble wrap helps prevent it from sustaining scratches most especially if it’s a wooden bed frame. Tape each part up nicely to ensure security.

More tips:

Ensure that the mattress frame and board are protected and stay that way while they are being transported to the new location. It is never a bad idea to have a few pairs of extra hands around. Get some friends or family to come help with the move as moving a king size mattress is no meat feat, pun intended!

Tips to follow before buying Hyper Convergence Systems for Infrastructure

Tips to follow before buying Hyper Convergence Systems for Infrastructure

Hyper converged infrastructure or hyperconvergence refers to a system of infrastructures that is combined with electronic and software technologies in such a fashion that all the components of the infrastructure are interconnected and operate in synch with each other.

If you are looking for a vendor for Hyper Converged Instructure, look no more. At Hitachi ICT Solutions, their consultants offer specialised advice and have years of experience about the various services you need. Kickstart your business with Hitachi ICT Solutions Hyper Converged Solutions today.

Some of the major component of hyper convergence systems are computational and data analysis capabilities, data storage, networking and virtual solutions. Hyper convergence systems are attached to software platforms which can present easy to read dashboards for live availability of system status.

Advantages of Hyper Convergence Systems
Most hyper converged infrastructures provide the mentioned benefits.
Eliminates the need for individual systems and therefore saves costs by using one system to govern all the components.
All the data that is passed through the system can be processed by using a single unified set of protocols.
With virtualization capabilities, systems and situations can modeled and analyzed for scaling of operations.
Brings a change in the management attitude by making it more application-orientated rather than focusing only on hardware. This causes an increase in mobility and and standardization of management policies.

Tips to follow before buying Hyper Converged Infrastructure
One should never jump into the decision of buying and implementing hyper converged infrastructure. This is primary because, hyper converged infrastructure has a lot of additional hardware and software requirements that consume a lot of capital and resources. Before deciding to buy and implement hyper converged structures, the company should thoroughly analyze its goals and needs and understand exactly what are the targets that is trying to achieve through hyper converged infrastructure.
Also the buyer that is going to supply hyper converged infrastructure must be checked for quality and the product that is being given must have necessary space and capability for scaling. The systems that are being updated with the hyper converged platform must be compatible with platform. Added to this previous customer reviews must be checked and the supplier of hyper converged infrastructure must have a good story behind his product. Additionally, the software capabilities must be checked to ensure that the platform that is being introduced can handle all the workload that the company needs to manage.

Hyper converged infrastructure is the best way to manage and control all the system components and combine them together for better management of the lifecycle of the systems. Hyper convergence of systems and infrastructures allows for better monitoring of the overall systems and optimizes resource usage through efficient use of each component.

Latest Trends in SAP HANA

Latest Trends in SAP HANA

The SAP HANA is a database application that was developed by SAP. The acronym HANA stands for high-performance analytic appliance. The advantage of this application is that it is able to process massive amounts of data directly from the RAM. This data is processed in real time and within a very short time frame. The ability to process data instantaneously makes it a useful application in many organizations where quick results are required from transactions and analysis.

SAP HANA can be quite a new technology to grasp for you and your company. However, with Hitachi ICT Solutions, you can be assured that your team will master it effectively. If you are looking for a SAP HANA vendor Singapore, you should definitely look for SAP HANA Hitachi ICT. Check out their site today.

Like any other application, SAP HANA is constantly updated with new features. Here are some of the latest trends in SAP HANA.

Data, an asset that can be traded
In an age where data is highly dominant in almost all industries, it should come as no surprise that stakeholders are now viewing data as a potential commercial asset. Organizations and technology vendors are increasingly looking for services that can enable the trade of internal data. Applications like SAP HANA, with its high-speed data processing capability will prove to be instrumental when develop and sifting through data for commercial purposes.
The predictive analytics feature in SAP HANA will allow businesses to analyze certain trends that business strategies need to focus on. This helps to better manage data and organize it as per need.

Optimization of business applications
SAP HANA, due to its quick and responsive data processing feature, allows organizations to quickly respond to changing trends and requirements. This helps businesses to stay competitive and the real-time reporting allows the customization of data. These features improve performance and help businesses to gain better insights.

Machine learning
Machine learning is the ability of computers to learn without having to program them. Machine learning combined with artificial intelligence is becoming one of the most popular trends in businesses today. The process of machine learning is based on historical and relevant data. Computers learn from the past and then modify their responses when faced with future similar scenarios.

The SAP HANA, with its ability to mine highly relevant data instantaneously will soon become a crucial resource in the field of machine learning. Computers can be trained using real-time data to hone their responses. This will in turn shape the business landscape in the future. Machine learning will soon be incorporated into platforms and analytic tools for organizations to use them in their daily processes. Some other partners to consider are ERP solutions providers such as MSC Consulting in Singapore.

Important things you need to consider when choosing an SAP partner

Important things you need to consider when choosing an SAP partner

There are a lot of technologies you can use as a business owner to increase your output and overall productivity. That begin said, it is important for you to have it in mind that not every technology will be good for your business. Some may create more problems for you or make things even more complex.

SAP is a popular ERP solution that can simplify your business process and help you get more done in less time.

Choosing SAP is a step in the right direction, but there is a challenge you are going to face and that is of choosing an SAP partner. Since there are so many SAP partners out there, it is likely going be difficult for you to choose among them. Settling for just any SAP partner is not really a good idea. And this is because; they may not be able to address the needs of your company.

One thing you should keep in mind is that the partner you choose is going to be responsible for training your team and your support system. The partner you choose is surely going to determine if you are going to thrive or strive.

In this article, we are going to be looking at some things you should do when choosing an SAP partner.  You can also visit to learn more about choosing an SAP partner.


This is the first thing you should do before choosing any SAP partner.  Yes, this might seem simple, but it is important. Get to know as much as you can about what your partner is like. Find out who is on their team, their culture, the way they relate with each other and the area they specialize in.

You need to know in advance if you can rely on them in the event of an emergency. Since there are so many partners that make empty promises, it is important that you find out what is really going on within their inner circle.


Before choosing an SAP partner, you have to be sure that they have both the skill and experience to handle the needs of your company. It is best you select a partner who has been in the IT industry for years and has encountered and handled different challenges. There are a lot of ways you can determine the experience of a partner. One of the best ways you can do this is by checking how long they have been in the IT industry and what others have to say about them.


There are thousands of testimonials out there that can help you choose a great partner. Granted, the SAP system is good, but not all SAP partners are great or will be able to handle your needs. So, if you cannot find a recommendation or testimonial that says volume about the partner you have selected, then you should look for another one with excellent testimonials.


Partnering with an organization that is stagnant or that hasn’t done anything significant for the last couple of years is not really a good idea. If you are really serious about growth, then you should choose a partner that is ambitious. Find a partner that can easily implement your ERP strategy and bring it to life.


The various SAP systems that are available are perfect for a growing organization, but this does not mean that they can cover all your business tasks in a unique way. When selecting a partner, it is important that you choose one that is able to address the unique needs of your business.

Final note

Applying the tips in this article is going to help choose an SAP partner that will be able to handle your needs and grow your business.

How Microsoft Dynamics Makes CRM Solutions Equitable For All?

With the market witnessing the toughest competition ever in the history of mankind, technological enhancements to business processes are no longer a luxury, but a necessity. This is where
CRM solutions step into modern enterprises and help them in conquering these challenges. Although Oracle was the one which pioneered enterprise class CRM tools, a lot many players have
stepped into the market, realising the hunger for such tools in the market. The earliest CRM tools exclusively facilitated enterprises to manage customer relations from end to end. However,
the scope of CRM tools has now been broadened.

If you are looking for a Microsoft Dynamics partner, you should consider MSC Consulting (S) Pte Ltd. They have an experienced team ready to attend to your enquiries, and a specialised team to follow up with any difficulties you might face. Check out their website above.

Amidst, all the clamouring for supremacy in the CRM market, two behemoths stand out from the rest. They are Microsoft and Salesforce. The
growing number of Microsoft dynamics partners in the market, provides sufficient proof of the efficacy of Microsoft’s approach to CRM. The difference between Microsoft’s approach and
Salesforce’s approach to CRM is that, while Salesforce prompts companies to use its proprietary tools, Microsoft is working towards democratising the CRM. Salesforce’s approach is strongly
customer centric and is based on allowing enterprises to customise their solutions on the same lines. In this article we shall discuss, how Microsoft dynamics makes CRM solutions equitable
for all.

Microsoft hopes to make everyone accountable in CRM
Most efficiency experts praise Microsoft’s approach to CRM, as it expedites CRM considerably. In order to achieve this, Microsoft has made the CRM functionalities, an inbuilt feature of
its other popular softwares. What this means is that, each employee of any organisation which utilizes Microsoft dynamics, is forced to do their work in line with the CRM goals set by
the same organisation. Every employee of the organisation will have their own responsibilities in achieving the CRM goals. Thus making CRM far more effective and quicker than before.
This is possible, thanks to the common data model leveraged by all of Microsoft’s offerings. As Microsoft has software solutions for all departments, its CRM solutions will finally be
equitable for all stakeholders.

Leveraging customer data has never been simpler
Since all of Microsoft’s applications are developed from the same development kit, building customised solutions is not tough like it used to be earlier. As an added bonus, even
application compatibility is intrinsically enhanced. The common data model has unified the numerous data storages into one entity, making customer data operations simpler than ever
before. As a result of this, reports and data inferences can be easily compiled by enterprises as and when required.

Apps used for CRM

CRM stands for Customer service management. It helps to combine data from across all channels to maintain it at one place making it available for the entire organization. CRM helps in boosting the marketing, sales and customer service relations of the organization. Since all the data is available in one spot, it is easier for the customer service representative to answer any unexpected question when all necessary data is at one spot. To improve the efficiency, many functions have been added to CRM such as email, phone, social media or other channels. Marketing automation, sales force automation, contract center automation etc. are some of the added features of CRM these days. Some of the CRM tools are Salesforce and Microsoft Dynamic CRM.

If you are looking for a Microsoft Dynamics CRM vendor, you should consider Microsoft Dynamics CRM Vendor Hitachi ICT. They have an experienced team ready to attend to your enquiries, and a specialised team to follow up with any difficulties you might face. Check out their website above.

Choosing the best suited CRM for your company is necessary for proper functioning of your organization. To choose the best suited CRM, you need to first analyze on what your organization would like to track, how your team works etc. based on the findings of this analysis, you need to choose the CRM which your company requires. Since CRM is so widely used in every area of business, now days, it is incorporated into the mobiles in the form of apps. This article will be discussing some of the top apps that have helped to incorporate CRM into mobiles such as MSC Consulting Pte Ltd.

HubSpot CRM is one of the best CRM apps available. It is fully free and provides all the features for a team of unlimited size with up to one million contacts. It helps to improve your team’s performance with the modern day sales processes. This app provides it users the ability to create contacts, company, and deal records. All these can be associated with each other and the properties can be edited and customized.

Google Contacts is another CRM app. It is best suited for a smart personal CRM inside Gmail. It is he best suited app for personal use.

Bitrix24 comprises of a suite of tools which help in the proper functioning of the team. It comprises of all the core features for a team of 12 members for free.

Freshsales is best suited for customer information which is tied to your support tools. They too comprise of all the necessary core features for a team of 10 members for free.

Zoho CRM comprises of all the necessary office tools. It accommodates 25k contacts and 10 team members for free.


As the area’s first EcoBroker® and Earth Advantage trained real estate agent, my passion for quality, high-performance homes in new construction and remodeling has led to special expertise in helping individual home buyers and communities focus on developing sustainable design and living on local and regional levels. John L. Scott, Medford, OR.